Concrete mixing station should pay attention to what matters

　　Concrete mixing station is a large construction machinery and equipment, and the whole mixing station needs to operate more matters in the production process, which aspects should be paid more attention to?

　　1. The concrete mixing station as a whole needs to be installed smoothly and firmly.

　　2, concrete mixing station before work check clutch, brake accessories, etc., whether the wire rope is broken, damaged. Whether the device is in trial operation. If the mixing cylinder rotates smoothly, does not vibrate, does not deviate from the direction, the left and right sides of the hopper and the feed door rotate normally, and the structure under the hopper is normal, it can be carried out.

　　3. The supporting equipment of the concrete mixing station can not be overloaded during the production process. During the operation of the mechanical equipment, no force or other objects can be extended into the mixing cylinder to touch, clean and repair.

　　4. When the hopper of the concrete mixing station rises, no one can be under the hopper. If maintenance needs to be carried out under the bucket, the switching power supply should be turned off and the hopper should be fixed with a strong chain rope before it can be carried out.

　　5, concrete mixing station hopper should be slow down, down speed can not be too fast, if too fast may damage parts or cause common failures. Do not feed until the hopper has come to a steady stop.

　　6. During the operation of the concrete mixing station, if there is a sudden power failure or common failure, manpower should be used to clean up the materials in the mixing cylinder, and then check or repair.

　　7. If the actual operator needs to enter the mixing cylinder for cleaning or maintenance, the switching power supply should be strictly controlled.

　　8, in the process of driving and cleaning, the actual operator can not climb on the hopper.