Concrete mixing plant how to achieve energy conservation and environmental protection

　　Concrete mixing plant in order to achieve energy saving and environmental protection, what aspects should be started?

　　1. Dust control of concrete mixing station:

　　Mixing station easy to produce dust places are mainly mixing floor feeding port and material yard. The mixing floor of the selected equipment is closed mixing. In order to further eliminate dust, movable color steel plate is added as the dust surface, the space of the dust discharge port is sealed, and two external symmetrical water spray pipes are added at the cement feeding port to prevent dust diffusion. The dust in the material yard can be set up electronically controlled or manual spray device according to the fixed position of the dumping ground to control the escape of dust and ensure that the dust meets the standard.

　　Second, cement mixing plant wastewater treatment:

　　A drainage ditch is set in the place where the waste water is produced, and a three-stage sedimentation tank is set at the end of the drainage ditch to separate the solid and liquid, and a self-priming pump is configured to recycle the precipitated water, so that the waste water in the entire production area can be recycled after all treatment, that is, to meet the environmental discharge standards.

　　Third, solid waste treatment of concrete mixing station:

　　Non-recyclable waste and domestic waste generated in production and life will be piled up and managed and treated in a unified manner in a garbage pond. There is no school around the mixing station, basically no residents, environmental protection investment requirements are not high, and the investment cost is not large. Concrete mixing plant will strengthen environmental management to build the mixing plant into a green environmental protection mixing plant.

　　Fourth, concrete mixing station noise control:

　　The noise mainly comes from the equipment, the selected equipment is optimized by configuration, the noise of the equipment itself is small, and the maintenance and overhaul are strengthened during use, that is, the service life of the equipment is extended, and the noise pollution is reduced. According to the actual situation can also be set up cubicle wall, cubicle belt.