TECHNICAL CHARACTERISTICS
ECONOR 30
Production(m³/h)
30
Length(mm)
10.326
Height(mm)
4.097
Width(mm)
3.670
Ø Vat Spiral(mm)
1.900
Ø Auger Screw Spiral(mm)
342
Separator Cut(mm)
0,25
Scoop Wheel Power(kw)
15
Auger Screw Power (kw)
7,5
Stirrers (kw)
2 x5,5
Cleaning Showers
3
Pump to Water Scales(kw)
5,5
Pump to Truck Cleaning(kw)
5,5
Intake Hopper Pump(kw)
-
Maximum Gram¡nulometry(mm)
40
The ECONOR-30 is the recycling model designed for high cleaning demands. It is manufactured as standard with three cleaning showers for positioning three trucks at the same time and it incorporates an exclusive independent area for cleaning vats without waste concrete.

The functioning of this model is designed based on ancient water wheels originating in the Middle East and commonly found in the south east of Spain.

The cleaning system is similar to other models, with an internal structure that works as a transport spiral, and incorporates blades all around the spiral that improves the sweep of the material to the output wheel. This wheel has special scoops and grooves for collecting all the aggregate recovered and tipping it on the auger screw extractor at the other end of the vat.

As standard it has a compressor and pneumatic installation for system autonomy. All models include as standard stirrers, safety grilles for installation on construction site tanks, level probes for the tanks, water pumps, showers with a button, pneumatic installation and control panel.
Powered by CoalaWeb
  • ECONOR 1.png
  • ECONOR 2.png
  • ECONOR 3.png
  • ECONOR 4.png
  • ECONOR 5.png
  • ECONOR 6.png
  • ECONOR 7.png
  • ECONOR 8.png
  • ECONOR 9.png
  • ECONOR 90.png
  • ECONOR 91.png
  • ECONOR 92.png
  • ECONOR 93.png
  • ECONOR 94.png
  • ECONOR 95.png
  • ECONOR 96.png
  • ECONOR 97.png
  • ECONOR 98.png